|
|
Residential house
Jakoubě, Jiří ; Bolkovec, Martin (referee) ; Donaťáková, Dagmar (advisor)
The master’s thesis dealt with newly built residential house. The building is located in the Liberec region in the cadastral land parcel number 42/1 in the cadastral area Liberec-Rochlice. Address of the building is 227 Vratislavická Liberec-Rochlice 460 59th Built up area is 655 m2. The new building is located on sloping ground to the south. The building is located on the still undeveloped parcel near residential homes and nursing home. The building is partially basement with four floors. In the basement is the technical support for building, storage and parking facilities. The first two floors are commercial applications for administrative operations. In the third and fourth floor apartments are located. In total there are five residential units for a total of 17 persons. The supporting structure of the building is a monolithic reinforced concrete deck Beon C 25/30 B and reinforcement 500th The building is based on the footings of plain concrete C 16/20, and the bases of concrete and plate C 25/30 and the reinforcement B 500th Outer and inner walls are lined walls in the system Porotherm. The roof is designed as a flat. Walk-on part is designed as extensive or as a patio with concrete paving. Nepochúzná part has a stabilizing layer of gravel.
|
|
|
Multifunctional building
Svoboda, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
This is a detached multifunctional building in the construction of commercial and residential buildings. The building is located in České Budějovice. Multifunctional building has five floors, one underground floor and a partial basement. The building is covered single-surface vegetation and double skin roof rack. On the first floor is a multifunctional building with reception vestibule, hall of which are accessible to all businesses and also the staircase space. The first floor is also a cafe, spatially separated from the multifunctional building. The café includes restrooms and stairs to get to the hinterland own cafe, where there is room for staff, toilet and are relevant warehouses drinks and other amenities. On the second floor there is a fitness center with all facilities and sanitary facilities. The gym also includes a reception and a health food store. In the third to fifth floor are residential units. A total of 5 apartments, where 2 and 3 flats are always identical. The building is based on foundation strips of plain concrete and masonry made of POROTHERM building system with a contact system of the company ISOVER. The project has been prepared complete documentation of new multifunctional building at the level of documentation for construction. Design of the building emphasizes the static and layout, fire safety, energy savings and safety in use. Drawing documentation was realized in ArchiCAD.
|
|
|
Kindergarten
Kaška, Jan ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The diploma thesis contains a proposal and construction solution of a new nursery school in the village of Postřelmov in the stage of project documentation for construction. The kindergarten has a rectangular shape and has two above-ground floors and one basement floor. The main entrance to the building is wheelchair accessible and is oriented to the south. In the basement there are 26 parking places for employees of kindergarten and elementary school in Postřelmov and also a technical background. The first floor consists of two classes of kindergarten, on the second floor there is the third class and a large hall, which will be used mainly for cultural events in the kindergarten. The foundation structure is made up of concrete strips and the foundation foots are designed in places of garage parking. The vertical structures in the basement are designed from concrete fittings, the vertical load-bearing structures in the above-ground floors are designed in the Porotherm masonry system, the other non-load-bearing structures are designed in the Ytong system. Due to the large spans, the horizontal structures are designed from prestressed Spiroll ceiling panels. The roofing of the building consists of a flat green extensive roof. The project documentation also includes construction - physical assessment and fire - safety solution of the building.
|
|
|
Riding-hall Lipůvka
Rohrerová, Aneta ; Kunc, Petr (referee) ; Myslín, Jiří (advisor) ; Skála, Jiří (advisor)
The bachelor work was prepared as a project for construction based on the studio work from the 2. year. Riding-hall Lipůvka is a complex of three buildings consisting of a pension with a restaurant, riding hall and stables. The complex is situated in the undeveloped area on the outskirts of Lipůvka in the district Blansko. The entire building is designed barrier free. The project documentation includes a two-storey building to pension with a restaurant. The structural system consists of a building system POROTHERM with a contact insulating system from company ISOVER. The roof is composed of bonded trusses with lightweight metal roofing from company LINDAB. Establishment of the object is solved mainly by reinforced concrete strips, sometimes with reinforced concrete quiffs. The building is situated on the north-south axis. Architectural expression builds on agricultural use.
|
|
|
The Hotel
Jará, Andrea ; Zamazal, Radomír (referee) ; Donaťáková, Dagmar (advisor)
This bachelor thesis is about a hotel. It is located on large grounds close to the Brno reservoir. These grounds are built-up by many other buildings that are closely connected to the running of the hotel. This project is focused only on the hotel building. It is designed as a four-storeyed structure with one underground floor and three above ground floors. Two main entrances lead into the hotel. Two floors are housing premises with total count of 24 rooms. The ground floor is intended for reception desk and cafeteria. The underground floor consists of wellness centre and technical facilities. The roof is flat DOU and the building is designed to be built with ceramic blocs Porotherm
|
|
| |
|
|
Family house D/2
Padrtka, Tomáš ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
Bachelor´s thesis includes the design and construction plan for a family house with a space for business in Bystrice nad Pernstejnem. The object has rectangular ground plan with one basement and tree groundfloors. The roof is designed as a saddle one. Building is based on strip foundations of concrete. Vertical and horizontal contructions are projected from building system Porotherm. The object has two regular entrances and one garage. To the building lead a walkway and driveway too.Whole estate is fenced. The main part of the building is intended for living, groundfloor can be used as a Legal office.
|
|
|
Family house
Mácová, Michaela ; Chuchma, Lukáš (referee) ; Klimešová, Jarmila (advisor)
This is a new family house in a partity developted area. The building is located in the city of Brno. The building has two above grand floor and one underground floor. In the underground floor are situed a garage with standing for two cars, two warhouses, technical room, and office. In the first floor be located a study room, dressing room, bathroom, separate toilet, a spacious living room with a dinning area and kitchen. Further, there are design office, which includes office, a room for employees, washroom and toilet. On the sekond floor there are two children´s room, bathroom, dressing room and room for parents, that includes a dressing room, bedroom and bathroom. The building is based on the footings of plain concrete C16/20. I tis a brick building from the systém Porotherm. The roof is a flat with Single-roof. Build-up area is 202 m2
|
|
|
The flat building in Znojmo
Kučera, Filip ; Janda, Lukáš (referee) ; Beneš, Petr (advisor)
The bachelor thesis deals with proposal of the new flat building. The flat building is located in the edge part of Znojmo. The building is situated in built-up area, intended for housing. The building is solved as detached house in the flat terrain. This is a three-storey building without cellar, which is finished by warm flat roof. On the ground floor there is a garage, a common spaces and a utility room. On the first and second floor there is four dwelling units, which are identical layout. There are flats 3+1. The building is based on foundation strips from concrete strip footing and is made by the building system Porotherm.
|
|
|
Block of slats with business premise BD-2
Slezák, Václav ; Šoulová, Eva (referee) ; Vlček, Milan (advisor)
The subject of this thesis is the design and construction of a residential building and a bank which forms part of the building, based in Komin within the city of Brno. The building occupies a rectangular ground space. The residential building has one underground floor, three above-ground floors and a saddle roof. The construction is based on concrete foundation girders, the vertical and horizontal structures are designed from the Porotherm system. This project was developed using AutoCAD software. The focus during development was on layout solutions, architectural appearance, static requirements and safety of use.
|
guest ::
